Breathalyser Calibration Service

Re-Calibration & Technical Service

All new units are supplied pre-calibrated, but after regular use all digital breathalysers will require a calibration service to ensure their continued accuracy.

Manufacturers recommend calibration checks at a maximum of 600 test cycles or 12 monthly.
More frequent service will be required following high use, poor storage or exposure to high alcohol levels or smoke/tar.

We recommend a calibration service interval of between 3-6 months for all users depending on high accuracy.

To reduce calibration requirements, store all units in a even temperature environment.
Allow units to air after use (avoids condensation damage to sensor).
Do not test within 25 minutes of alcohol consumption and avoid smoking for 30 minutes before testing)

Value Breathalysers offer a full re-calibration service using Guth Simulators.
All units are electronically checked and cleaned. Sensors are checked and if needed, replaced.
After calibration, all units are checked and certified for accuracy prior to return.

We can re-calibrate the following units

ALCOHAWK PRO, ALCOMATE PRO-Sx & PRO, ALCOMATE, ALCOHAWK ABI, ALCOHAWK PRECISIONS, CA2000, & CA3000 branded models AL5000 DA5000 AL6000 For any other models, or models not supplied by us, please phone for advice.

Units must be returned to us for professional calibration.
Test certificates are issued with each unit calibrated.

Purchase calibration service on-line and send your breathalyser together with a printed copy of the purchase confirmation to

ADTUK Ltd,
Falcon Lodge,
Hexgreave Hall Business Park,
Upper Hexgreave,
Farnsfield,
Newark,
Notts
NG22 8LS

Please ensure you include your full return details with every unit.

Full details will also be sent by e-mail after your purchase

See NEW Alcomate Pheonix Breathalyser

More Info
Value Breathalysers home page
Value Breathalysers Price: £29.99

People who bought this item also bought:

1. PRISM Pre-Calibrated Sensor Module for Alcomate Phoenix & AL7000 Breathalysers

2. Professional uni-valve universal mouth pieces Alcomate, Alcomate Pro, CA2000, DA5000 DA7000 Al7000 AL6000, AL7000, AL 8000 & Alcomate Prestige

3. Standard CA2000 and Alcomate mouth piece covers 100 pack

Pre-Calibrated Sensor Module for DA5000 Breathalysers

The Pre-Calibrated %BAC Replaceable Alcohol Sensor Module for the DA5000 Model Breathalysers supplied via Value-Breathalysers can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

The sensor is only for use with the DA5000 model breathalysers using %BAC display

Sent with full fitting instructions

Value Breathalysers Price: £15.99

People who bought this item also bought:

1. PRISM Pre-Calibrated Sensor Module for Alcomate Phoenix & AL7000 Breathalysers

SEMICON Pre-Calibrated Sensor Module for DA7000 Breathalysers

The Pre-Calibrated %BAC Replaceable Alcohol Sensor Module for the DA7000 Model Breathalysers supplied via Value-Breathalysers can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

The sensor is only for use with the DA7000 model breathalysers using %BAC display
Value Breathalysers Price: £13.40 (Excluding VAT at 17.5%)

People who bought this item also bought:

1. Pre-Calibrated Sensor Module for AL6000i & Alcomate Prestige Breathalysers

Pre-Calibrated Sensor Module for AL6000i & Alcomate Prestige Breathalysers

The Pre-Calibrated %BAC Replaceable Alcohol Sensor & Airflow Module for the AL6000i Model & Alcomate Prestige Breathalysers supplied via Value-Breathalysers can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

To identify the colour circuit board required for your AL6000 loosen the side screw and remove the black top cover to expose the sensor circuit board as shown. Choose red or green circuit board units. Please note units are not interchangeable and can not be replaced after fitting if you purchase the wrong colour unit.

All Digital Breathalysers

More info
Value Breathalysers home page
Value Breathalysers Price: £13.40

Circuit board sensor colour options

please select using the above instructions

Green Circuit Board Sensor & Airflow

Red Circuit Board Sensor & Airflow

People who bought this item also bought:

1. AL7000 Professional Digital Breathalyser

2. Standard Universal mouth piece CA2000 DA5000/AL5000/6000, AL7000, AL 8000 and Alcomate Prestige mouth pieces

3. PRISM Pre-Calibrated Sensor Module for Alcomate Phoenix & AL7000 Breathalysers

PRISM Pre-Calibrated Sensor Module for Alcomate Phoenix & AL7000 Breathalysers

The Pre-Calibrated %BAC Replaceable Alcohol Sensor Module for the Alcomate Pheonix and AL7000 Digital Breathalysers can eliminate the delays and complications of re-calibration by allowing you to simply "snap out" an old module and "snap in" a new module. This way, you can get back to reliable, accurate testing in a matter of seconds!

The sensor is only for use with the Alcomate Phoenix & AL7000 breathalyser supplied by Value-Breathalysers and does not fit other breathalysers or non %BAC display models

All Digital Breathalysers

More info
Value Breathalysers home page
Value Breathalysers Price: £14.99

People who bought this item also bought:

1. AL7000 Professional Digital Breathalyser

2. Professional uni-valve universal mouth pieces Alcomate, Alcomate Pro, CA2000, DA5000 DA7000 Al7000 AL6000, AL7000, AL 8000 & Alcomate Prestige

3. Re-Calibration & Technical Service

Best Sellers

New Products